How Many Times Do You Float Concrete?

How Many Times Do You Float Concrete? The amount of times that you float concrete can depend on the type of concrete that is being used, the weather, and the experience of the person floating the concrete. In general, it is recommended to float concrete two or three times.

Do you need to float concrete? Floating concrete is a process of placing concrete in a shallow tray or “form” and allowing it to set in a slightly plastic state. This produces a very smooth surface with no voids or honeycombing.

When should I start floating concrete? The concrete should be floated when it is stiff enough to hold a good finish and has a workable surface.

How many times do you float concrete? There is no definitive answer to this question as it can depend on a number of factors, such as the type of concrete, the weather conditions, and the experience of the person floating the concrete. However, on average, most people say that you need to float concrete at least three times.


Frequently Asked Questions

How Many Times Do You Trowel Concrete?

This is a difficult question to answer as it depends on the project requirements. Typically, a good rule of thumb is to trowel the concrete twice – once when the concrete is placed and once when it begins to harden.

How Soon Can You Float Concrete After Its Been Poured?

Most concretes will gain enough strength to be placed on a floating slab in 28 days.

When Should You Bull Float Concrete?

Bull floating is the process of using a float to smooth the surface of wet concrete. The float is a long, rectangular tool with a handle on one end and a flat, metal blade on the other. The blade is tilted at an angle and dragged across the surface of the concrete, pushing and pulling the material around until it is smooth.

How Do I Get A Smooth Finish On Concrete?

There are a few ways to get a smooth finish on concrete: using a trowel, using a float, or using a magnesium float.

Can You Float Concrete Too Much?

Yes, you can float concrete too much. When you add too much water to concrete, it can weaken the mixture and lead to decreased durability and strength. Additionally, if too much water is used, it can lead to excessive bleeding and segregation of the concrete ingredients.

What May Occur If A Slab Is Floated Too Soon?

If a slab is floated too soon, it may not have enough time to cure properly, which could lead to cracking or other problems.

What Causes Concrete Slab Delamination?

Concrete slab delamination can be caused from a number of factors, such as: improper installation, substandard materials, insufficient curing, and environmental exposure.

How Long Do You Wait To Bull Float Concrete?

Bull floating is the process of smoothing concrete after it has been placed and before it has hardened. The time to wait before bull floating will depend on the weather and the mix design, but typically it is done after the concrete has achieved a plasticity state.

Do You Have To Float Concrete?

No, you don’t have to float concrete; however, it is often done to help ensure a level surface and to avoid potential sinkholes.

Can You Just Bull Float Concrete?

Yes, you can bull float concrete, but it is not recommended. Bull floating is used to smooth and level the surface of wet concrete.


There is no definitive answer to this question as it can depend on a number of factors, such as the type of concrete, the weather conditions, and the specific project requirements. However, in general, it is typically recommended to float concrete between two and four times.

Leave a Comment

Your email address will not be published.