How To Build A Wheelchair Ramp Over Existing Steps

Wheelchair ramps are a necessary feature for many homes and public buildings. They provide an accessible path for people who use wheelchairs or other assistive devices to get around. If you need to build a wheelchair ramp over existing steps, there are a few things you need to know. First, you’ll need to measure the height of the steps and the width of the wheelchair. You’ll also need to decide on the length of your ramp. The recommended slope for a wheelchair ramp is

How To Build A Wheelchair Ramp Over Existing Steps

There are a few different ways to build a wheelchair ramp over existing steps. One option is to build a level platform that spans the entire width of the staircase, and then build a ramp on top of that. Another option is to build a temporary bridge that can be dismantled when the wheelchair user is ready to ascend or descend the stairs.

-Ramps or steps that are the same or similar size as the existing steps -Plywood or other suitable material for a ramp -Circular saw -High-grit sandpaper -Stiles or railing pieces to fit around the edge of the stairs and connect to the plywood ramp -Cordless drill with 3/8″ bit -1 1/2″ hole saw -1/4″ hole saw -Latch (to

  • Determine if any handrails are needed
  • Measure the height of the steps
  • Determine how wide the wheelchair ramp should be
  • Buy materials needed for construction such as lumber, screws, nails

– what type of wheelchair ramp should be built? – should the wheelchair ramp be built on an incline? – should the wheelchair ramp be elevated? – should a handrail or guardrail be included? – how high should the wheelchair ramp be? – should stair risers or steps be included?

Frequently Asked Questions

Is 5% Slope Considered A Ramp?

Ramps are slopes that rise gradually from one elevation to another. If a slope has a 5% slope, it is considered to be a ramp.

How Do You Make A Simple Wheelchair Ramp?

A wheelchair ramp is a small, easily- constructed accessory that can make it easier for someone using a wheelchair to get onto and off of a curb, step, or other level surface. Ramps should be at least 36 inches wide and 18 inches high, and should have a running slope of at least 1:12.

What Size Ramp Do I Need For 3 Steps?

A three-step ramp is typically the smallest size needed.

How Do You Make A Ramp Over One Step?

A ramp over one step can be made by constructing a set of stairs that lead up to the ramp, then creating a ledge on the bottom of the ramp that extends out over the step.

What Is The Best Angle For A Wheelchair Ramp?

There is no definitive answer to this question as it depends on the particular circumstances of the wheelchair ramp installation. Some factors that may be considered include the terrain and surface of the ramp, how many stairs or steps are required to reach the wheelchair, and the size and weight of the wheelchair.


If you are considering building a wheelchair ramp over existing steps, there are a few things to keep in mind. First, make sure the space you are working in is able to support the weight of the wheelchair and the person using it. Second, make sure the stairs themselves are structurally sound and do not have any loose pieces or cracks. Finally, make sure the wheelchair ramp is designed correctly to meet the specific needs of the individual using it.

Leave a Comment

Your email address will not be published.