How To Cut Small Pieces Of Tile

Tile is a versatile material that can be used to create a variety of designs in your home. Whether you’re looking to tile your kitchen backsplash, bathroom floor, or even your fireplace, knowing how to cut small pieces of tile is key. There are a few different methods you can use to cut tile, but the most common is using a wet saw.

How To Cut Small Pieces Of Tile

When cutting small pieces of tile, it is important to use a sharp knife and be careful not to cut yourself. Try to hold the tile in one hand and the knife in the other, and make sure to keep your fingers clear of the blade. Cut close to the edge of the tile, then pull the tile off the countertop with apron string or rubber gloves.

-Tile cutter -Tile saw -Tape measure -Plywood or hardboard -Ruler or a straight edge -Circular saw -Jigsaw -Sandpaper -Cordless drill -1/4″ hole saw bit -Kreg jig (optional) -Paint or an adhesive to seal the finished tile

  • Mark the tile where you want to cut it. you can use a marker or a piece of tape
  • Hold the tile steady with one hand. use the other hand to hold the tile cutter steady and line up the blade

– To cut small pieces of tile, use a wet saw or a tile nipper. – For wet saws, use a blade that is at least 18 inches long. For tile nippers, use a blade that is at least 2 inches wide. – Hold the tile firmly in one hand and use the other hand to guide the blade through the tile. – Make sure to hold the tile against the fence or guide rail of the saw so that it doesn’t move.


Frequently Asked Questions

How Do You Cut Small Sections Of Tile?

Tile cutters can be used to create small sections of tile. The cutter is placed onto the tile and the blade is rotated to create the desired section.

Is There A Hand Tool To Cut Tile?

There is not a hand tool to cut tile.

How Much Does A Hand Tile Cutter Cost?

A hand tile cutter costs about $50.

How Do You Cut Small Tiles Without Chipping Them?

Picking a tile saw that has a fine-tooth blade will help avoid chipping. For tiles that are slightly too big to fit on the saw, a jigsaw can be used with a fine-tooth blade to make the cut.

How Do You Cut Tiles By Hand?

Tile cutting by hand is often done with a tile saw, but can also be done with a hand tile cutter. The most common way to cut tiles is by using a straightedge and a cutting edge.


In Closing

There are a few different ways to cut small pieces of tile. One way is to use a jigsaw or coping saw. Another way is to use a tile cutting wheel on a power tool.

Leave a Comment

Your email address will not be published.