Where To Locate Gutter Downspouts?

Where To Locate Gutter Downspouts? The best place to locate a gutter downspout is at the corner of the house, near the foundation.

How far apart should downspouts be? Downspouts should be installed at least 10 feet apart.

How do you decide where to put downspouts? Ideally, downspouts should be positioned so that the water flows away from the foundation of the house and off of the property. If possible, they should also be directed to a rain garden or other landscaped area that can absorb the water.

How many downspouts should a house have? There is no one definitive answer to this question. Some factors to consider include the size and slope of the roof, the amount of rainfall in the area, and the size of the drainage system. Generally, it is recommended to have one downspout for every 200 square feet of roofing.


Frequently Asked Questions

Where Should Gutter Downspout Be Placed?

Gutter downspouts should be placed so that they discharge water away from the foundation of the building and other structures, as well as landscaping.

How Far From End Of Gutter Should Downspout Be?

Downspouts should be positioned so that the discharge from the downspout does not create a nuisance, such as causing erosion or flooding. The discharge from the downspout should also not cause damage to the building, such as by eroding foundation soils.

Where Should Gutter Downspouts Go?

Downspouts should be directed away from the foundation of the home. If they are not, water can leak into the basement or crawlspace.

How Long Can A Gutter Run Be With One Downspout?

A gutter can run up to 25 feet with one downspout.

How Far Should Downspout Extensions Be?

Downspout extensions should be long enough to discharge the water at least 10 feet away from the foundation of the house.

How Do You Layout A Downspout?

The best way to layout a downspout is by elevation. You’ll want to start by figuring out where you want your downspout to be in relation to your foundation. Once you have that figured out, you can mark the spots on either side of the foundation where the downspout will attach. Then, using a level, mark the spot on the ground where the downspout will discharge water. Finally, using a hacksaw or miter saw, cut the downspout to length and install it according to your marks.

How Do You Layout Gutters?

Layout gutters by measuring the length of the roof and then calculating the gutter size and number of downspouts needed. Mark the locations for the gutters and attach them using brackets.

How Many Downspouts Do You Need On A House?

You need one downspout for every 100 feet of roof drainage.

How Do You Measure For Downspout Extensions?

Downspout extensions are measured to ensure that they will be the correct length to funnel water away from the home. The extensions are typically measured from the ground to the bottom of the downspout, and this measurement is then used to determine the correct size and type of extension that is needed.

How Far Can You Go Between Downspouts?

The distance you can go between downspouts is limited by the length of the downspouts and the slope of the ground.


Gutter downspouts should be located so that water discharged from them will drain away from the building. They should also be directed away from walkways, driveways, and other areas where people might be walking or driving.

Leave a Comment

Your email address will not be published.